Signal Plus
8" BLE/WiFi Blade Antenna, 2.4/5.8GHz, SMA, 5dBi
8" BLE/WiFi Blade Antenna, 2.4/5.8GHz, SMA, 5dBi
SKU:AVX-AN-BLE7
Notify me when back in stock
We'll only use your email for this notification.
Couldn't load pickup availability
Share

An outdoor-rated blade antenna for the Bluetooth and WiFi port on your mesh radio. Its main job on outdoor solar nodes like the Atlavox Beacon: flashing firmware over Bluetooth (OTA/DFU) from farther away, with fewer dropped or failed updates, so you don't have to climb the roof or take down the pole. It also gives your phone a stronger link for pairing and everyday app use. This is not a LoRa antenna: it covers 2.4GHz and 5GHz only and will not improve your 915/868MHz mesh range.
Who it's for
- Solar and Beacon node owners who update firmware over Bluetooth and want to do it from the ground, not up a ladder.
- Builders whose radio sits in a weatherproof box that blocks the internal Bluetooth antenna.
- Anyone who wants a steadier phone connection to a node mounted up high, or a better ESP32 WiFi link.
Key Benefits
- Flash firmware from farther away: 5dBi of gain at 2.4GHz (measured 5.03 to 5.23dBi) extends the range and reliability of Bluetooth OTA/DFU updates.
- Better phone pairing and app use: a stronger, steadier link to your node from the ground.
- Made for outdoors: IP65 housing and a nickel-plated connector that passed a 48-hour salt spray test.
- Dual-band: 2.4GHz Bluetooth and WiFi, plus 5GHz WiFi (6dBi).
- Aim it where you need it: swivels to straight, 45 or 90 degrees.
How it Works
Most radios use a tiny Bluetooth antenna on the circuit board, and inside a sealed or metal enclosure that signal is weak. A firmware update sends a lot of data over that link, so a weak signal means slow transfers, dropouts and failed updates. Moving the antenna outside on an SMA port lets the signal reach your phone or laptop directly, so updates finish faster and more reliably from farther away. The pattern is omnidirectional, so you don't need to point it at your phone.
Specifications
| Frequency | 2400-2500MHz / 5150-5850MHz |
| Gain | 5.0dBi (2.4GHz) / 6.0dBi (5GHz) |
| VSWR | 2.0 or better |
| Efficiency | 73 to 76% at 2.4GHz |
| Impedance | 50 Ohm |
| Pattern | Omnidirectional |
| Connector | SMA Male (center pin) |
| Length | 8" (197.8mm) |
| Width | 32.1mm |
| Waterproof | IP65 |
| Materials | ABS/PC housing, FR4 element |
| Compliance | RoHS 2.0 |
What's in the Box
- 1x 8" BLE/WiFi blade antenna
Compatibility
Fits the Atlavox Beacon external BLE port and any radio with an SMA Female Bluetooth/WiFi port. RP-SMA ports need an adapter. Many handhelds have no external Bluetooth port, so check yours first.
FAQ
Will this increase my mesh range? No. It only improves the Bluetooth/WiFi link between your phone or laptop and your radio, including firmware updates.
Is higher gain always better? Not always. It focuses signal toward the horizon, so standing directly under a tall mast may give a weaker link.
Can I use it on a 915MHz port? It will screw on, but it is not tuned for 915MHz. Don't use it for LoRa.
Honest Limitations
- Range also depends on your phone or laptop's Bluetooth.
- Not for LoRa.
- IP65 is weatherproof, not submersible.
Specifications
| RF Standard | BLE/Bluetooth/WiFi |
|---|---|
| Frequency | 2.4GHz |
| Gain |
5.0 dBi
LOW
HIGH
|
| Antenna Style | Swivel |
| Radiation Pattern | Omnidirectional |
| VSWR (≤x:1) |
2.0
EXCELLENT
GOOD
POOR
|
| Impedance | 50 Ohm |
| RF Connector | SMA Male |
| Length | 197.8 mm |
| Weight | 32 g |
| Manufacturer | Signal Plus |
- 5 stars: 15 (100%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Strong, tall, and confident this 7” antenna delivers serious range and reliability. It looks great, performs even better, and definitely gets noticed. Big signal energy all around.
( old antenna disconnected in review for comparison)
I have mine installed on the Atlavox Beacon which is up on the roof, this lets me connect to the node over BT. I like that cause I don't consume a hop when having to use another radio as a relay. Packaging is superb and arrived quickly.
Great Quality, Fast shipping.
Perfecto
Perfecto!!
Great product great customer service
Easy to install and significantly increased the Bluetooth range of my node.
Finally, an external gain antenna for bluetooth, external to the unit. This makes placing the unit in a difficult place to access but with good Meshtastic coverage much easier.
At 75 feet connection is very reliable connecting at 150 feet conditions vary, but it will normally connect but may not stay connected very happy with antenna
This one works best, I had tried shorter round style antennas for the Beacon mounted on the peak of the roof and found that they were in the red for signal strength.
It's built like a tank. Very solid construction and many well thought out design and mounting options. You should watch the youtube video on all the ways you can hang it. Mine is serving as a neighborhood node with no issues
Excellent product and service
Working great, keep up the good work!
I live in a 3 story home and the antenna works best in the vertical position. The antenna is mounted on the third floor and I do get reception on the lower floor, basement when I am close to the same side of the home. It is perfect for the limited output of the signal without dragging my battery. I get service at anytime and at any duration. Fabulous item.
👍👍